159 This material must be protected from direct sunshine and kept in a cool, well-ventilated place away from sources of heat. A8 For combination packagings, if glass inner packagings (including ampoules) are used, they must be packed with cushioning material in tightly closed metal receptacles before packing in outer packagings. metal other than steel or aluminum (50N). If you have comments or suggestions on how to improve the www.ecfr.gov website or have questions about using www.ecfr.gov, please choose the 'Website Feedback' button below. The map below, compiled from data provided by the Federal Emergency Management Agency (FEMA), is the most accurate nuclear attack map and fallout demonstration available for 2023: (Image courtesy of FEMA and Halcyon Maps) The fallout would rapidly spread, turning targeted cities into whole affected regions. a. Filling limits must be in accordance with portable tank special provision TP3. 139 Use of the special arrangement proper shipping names for international shipments must be made under an IAEA Certificate of Competent Authority issued by the Associate Administrator in accordance with the requirements in 173.471, 173.472, or 173.473 of this subchapter. Orientation markings as described in 172.312(a)(2) are required when liquid hazardous materials may escape due to incorrect orientation. See UN1210, UN1263, UN1266, UN3066, UN3469, and UN3470. Microsoft Edge, Google Chrome, Mozilla Firefox, or Safari. A combination packaging consisting of a 4G fiberboard box with inner receptacles of glass or earthenware; b. The vacant space (outage) may be charged with a nonflammable nonliquefied compressed gas if the pressure in the cylinder or sphere at 55 C (130 F) does not exceed 125 percent of the marked service pressure. B4 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks are not authorized. B2 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks are not authorized. Unfortunately, the amendments to the table entries for various hazardous materials introduced new unintended errors that PHMSA is correcting in this notice. 173 For adhesives, printing inks, printing ink-related materials, paints, paint-related materials, and resin solutions which are assigned to UN3082, and do not meet the definition of another hazard class, metal or plastic packaging for substances of packing groups II and III in quantities of 5 L (1.3 gallons) or less per packaging are not required to meet the UN performance package testing when transported: a. These provisions apply only to transportation by water: W1 This substance in a non friable prill or granule form is not subject to the requirements of this subchapter when tested in accordance with the UN Manual of Test and Criteria (IBR, see 171.7 of this subchapter) and is found to not meet the definition or criteria for inclusion in Division 5.1. 137 Cotton, dry; flax, dry; sisal, dry; and tampico fiber, dry are not subject to the requirements of this subchapter when they are baled in accordance with ISO 8115, Cotton Bales - Dimensions and Density (IBR, see 171.7 of this subchapter) to a density of not less than 360 kg/m3 (22.1 lb/ft3) for cotton, 400 kg/m3 (24.97 lb/ft3) for flax, 620 kg/m3 (38.71 lb/ft3) for sisal and 360 kg/m3 (22.1 lb/ft3) for tampico fiber and transported in a freight container or closed transport vehicle. 352 Ammonium chlorite, ammonium chlorite aqueous solutions, and mixtures of a chlorite with an ammonium salt are forbidden for transport. Each special provision is indicated using a numeric or alphanumeric code. Only Specifications MC 304, MC 307 or DOT 407 cargo tank motor vehicles are authorized for transportation by vessel. Large Packagings are authorized for the Packing Group III entries of specific proper shipping names when either special provision IB3 or IB8 is assigned to that entry in the 172.101 Table. (2) A codes. 121 This substance, when containing less alcohol, water or phlegmatizer than specified, may not be transported unless approved by the Associate Administrator. This entry applies to machinery or apparatus containing hazardous materials as a residue or as an integral element of the machinery or apparatus. N85 Packagings certified at the Packing Group I performance level may not be used. subject to the Hazardous Materials Regulations must comply with all applicable requirements of Subpart F [172.500]. B133 Hydrochloric acid concentration not exceeding 38%, in Packing Group II, is authorized to be packaged in UN31H1 or UN31HH1 intermediate bulk containers when loaded in accordance with the requirements of 173.35(h) of this subchapter. . c. Each glass inner packaging is protected by a means of preventing puncture of the plastic bag (e.g., sleeves or cushioning) in the event of damage to the packaging (e.g., by crushing). However, sediments remaining in the tank that meet the definition for a hazardous material are subject to the applicable regulations of this subchapter. TP31 This hazardous material may only be transported in tanks in the solid state. Oxygen cylinders with installed actuating cartridges as prepared for transportation must have an effective means of preventing inadvertent activation. 145 This entry applies to formulations that neither detonate in the cavitated state nor deflagrate in laboratory testing, show no effect when heated under confinement, exhibit no explosive power, and are thermally stable (self-accelerating decomposition temperature (SADT) at 60 C (140 F) or higher for a 50 kg (110.2 lbs.) 49 CFR 173.24 - LII / Legal Information Institute (4) A code containing the letters IB or IP refers to a special provision that applies only to transportation in IBCs. A current copy of CGA pamphlet, CGA C-6 must be available at the facility servicing the life-saving appliance. Packagings may include a vent to permit the slow escape of gas (i.e. The portable tank must not be used if the wall thickness is less than that prescribed by the applicable T code in Column (7) of the Table for this material. eCFR :: 49 CFR 172.102 -- Special provisions. 44 The formulation must be prepared so that it remains homogenous and does not separate during transport. Bulk outer packagings must be liquid tight through design or by the use of lining materials. You can 172-123, 55 FR 52582, Dec. 21, 1990]. For transportation by aircraft, cargo transport units may only be offered for transportation and transported under conditions approved by the Associate Administrator. 3 This material is poisonous by inhalation (see 171.8 of this subchapter) in Hazard Zone C (see 173.116(a) of this subchapter), and must be described as an inhalation hazard under the provisions of this subchapter. The numbers and letters in the special provisions column are referred to in 49 CFR 172.102 with an explanation of their meanings. The packing group assignment and packaging must be approved by the Associate Administrator for Hazardous Materials Safety on the basis of the criteria in 173.21 of this subchapter and the package type used for the Series 6(c) test. However, button cell batteries installed in equipment (including circuit boards) need not be considered; and, c. The shipping paper must indicate UN 3091 Lithium metal batteries packed with equipment or UN 3481 Lithium ion batteries packed with equipment, as appropriate. We recommend you directly contact the agency responsible for the content in question. 38 If this material shows a violent effect in laboratory tests involving heating under confinement, the labeling requirements of Special Provision 53 apply, and the material must be packaged in accordance with packing method OP6 in 173.225 of this subchapter. A200 These articles must be transported as cargo and may not be carried aboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically authorized in 175.10. 388 a. Lithium batteries containing both primary lithium metal cells and rechargeable lithium ion cells that are not designed to be externally charged, must meet the following conditions: i. Specification 110A500W tanks must be stainless steel. Further, the limitations and/or additional requirements found in the special provisions of column 7 will supersede the packaging authorizations of column 8 of the Hazardous Materials Table. TP46 Portable tanks in sodium metal service are not required to be hydrostatically retested. (2) To the extent a special provision imposes limitations or additional requirements on the packaging provisions set forth in column 8 of the 172.101 table, packagings must conform to the requirements of the special provision. It must not freeze at temperatures above 15 C (5 F). Interpretation Response | PHMSA - Pipeline and Hazardous Materials Date of the visual inspection must be stenciled on the tank near the other required markings. The provisions of this special provision will be effective until January 2, 2023, unless we terminate them earlier or extend them beyond that date by notice of a final rule in the Federal Register. 353 Ammonium permanganate, ammonium permanganate aqueous solutions, and mixtures of a permanganate with an ammonium salt are forbidden for transport. e. When offered for transport in an ammonia dispenser, the receptacles shall be connected to the dispenser in such a way that the assembly is guaranteed to have the same strength as a single receptacle. The chemical under pressure must be classed based on the hazard characteristics of the components in the propellant; the liquid; or the solid. 39 This substance may be carried under provisions other than those of Class 1 only if it is so packed that the percentage of water will not fall below that stated at any time during transport. Single unit tank car tanks must have a reclosing pressure relief device having a start-to-discharge pressure set at no more than 1551 kPa (225 psig). N78 Packages consisting of inner glass, earthenware, or polyethylene or other nonfragile plastic bottles or jars not over 0.5 kg (1.1 pounds) capacity each, or metal cans not over five pounds capacity each, packed in outer wooden boxes, barrels or kegs, or fiberboard boxes are authorized and need not conform to the requirements of part 178 of this subchapter. All successfully conducted tests or reassignment to another compatibility group require the issuance of a new or revised approval by the Associate Administrator prior to transportation on or after the dates specified for each authorized mode of transport in this special provision. 383 For transportation by motor vehicle, substances meeting the conditions for high viscosity flammable liquids as prescribed in 173.121(b)(1)(i), (b)(1)(ii), and (b)(1)(iv) of this subchapter, may be reassigned to Packing Group III under the following conditions: a.